9.2 kW 4 pole three-phase motors

12 motors are registered for supply in Australia at 9.2 kW 4 pole, from 6 different brands. A 4 pole motor runs at a synchronous speed of 1,500 rpm on a 50 Hz supply. Registration means the motor may be supplied here. It is not a statement that it fits your application.

7 frame sizes · 13 recorded voltages · 31 mounting arrangements

Find a 9.2 kW 4 pole motor →

Frame sizes at this rating

IEC: 132, 132L, 132M, 132S, 160LR, 160M, 160S

The number is the shaft centre height in millimetres and the letter is the frame length. It fixes how high the shaft sits and where the foot holes are, so a 132M from one manufacturer mounts like a 132M from another.

Synchronous speed

1,500 rpm — 1500 rpm at 50 Hz, from 4 poles.

Full-load speed is lower than this by the motor's slip, and slip is not recorded in the register. Read it from the nameplate of the motor you are replacing.

Efficiency spread

Full-load efficiency across these registrations runs from 89.40% to 93.80%.

Over a motor's working life, running cost usually dwarfs purchase price, so this spread is worth more attention than it normally gets.

Every 9.2 kW 4 pole motor registered for supply in Australia, by brand. Enclosure and mounting are often recorded for a registration family rather than one model — see the note below the table.
Brand	Model	Frame	Enclosure	Full-load efficiency	Made in
ABB	M3AA 132MD 4 (IE3)	132M	IP55, IP56, IP65	91.80%	Poland, Finland, China, India
Bonfiglioli	BE132MB4 - ME4LB4	132	IP54, IP55, IP56	89.40%	Italy, Vietnam
NORD	160 SP/4	160S	IP55, IP66	91.04%	China, Italy
NORD	APAB SK132AP/4	132L	IP55, IP66	91.19%	Australia, China, Italy, Germany, Poland
SEW-EURODRIVE	DRN132L4	132	IP54, IP55, IP56, IP65, IP66	91.30%	Australia, China, Germany, New Zealand, United States of America
SEW-EURODRIVE	DRU160LR4	160LR	IP44, IP54, IP55, IP56, IP65, IP66	93.80%	Australia, New Zealand, Germany, France, China, United States of America, Brazil
SEW-EURODRIVE	EDRN132L4	132	IP54, IP55, IP56, IP65, IP66	91.30%	Australia, China, Germany, New Zealand, United States of America
Techtop	TAI 132M2-4	132M	IP55	89.50%	China
WEG	9.2kW 4P 132 W21 IE2	132M	IP55, IP56, IP65, IP66	90.11%	China, Brazil, Portugal
WEG	9.2kW 4P 132 W22 IE3	132S	IP55, IP56, IP65, IP66	91.05%	Brazil, China, Portugal
WEG	9.2kW 4P 160 W21 IE2	160M	IP55	89.88%	Brazil, China
WEG	9.2kW 4P 160 W22 IE3	160M	IP66	91.87%	Brazil, China

What this page establishes, and what it does not

Established: every motor listed is registered for supply in Australia at 9.2 kW 4 pole, and the frame, enclosure and efficiency shown are what its registration states.
Established: a 4 pole motor has a synchronous speed of 1,500 rpm at 50 Hz. That is arithmetic, not a measurement.
Read carefully: a registration often covers a family of motors rather than one part number. 7 of these registrations list several voltages and 10 list several mounting arrangements — meaning a compliant variant exists in that family, not that the model shown is that variant.
Not established: that any motor here bolts into your application. Shaft diameter, shaft length and keyway are not in the register, and neither is terminal box position.
Not established: that a motor is currently available, or at what price. The register records permission to supply, not stock.
Not in this dataset: full-load speed, starting current, duty rating, and suitability for inverter operation.

Replacing a motor?

What each figure on the nameplate means, which of them decide whether a replacement fits, and which you have to confirm off the drawing.

Read the guide →

Match against your specification

Add voltage, frame, mounting and enclosure to narrow these 12 registrations to the ones that meet your requirement.

Open the finder →

Known limitations

What the register omits, where family registrations blur model detail, and the checks you always have to make yourself.

Understand the gaps →